Jig to manipulate rib structure for back reglue

[Doug Proper Guitar Specialist]

If you are adventurous enough and interested in the Eric Clampton Jig, here is the parts list:

All parts were sourced from McMaster Carr. The Threaded rod – I have in house in 4 foot lengths but included it in the parts list anyway. Everything was sourced from McMaster-Carr.

I’ll try attaching a picture – not sure if I know how to do that though.

Low-Strength Steel Threaded Rod 1/4″-20 Thread Size, 6″ Long
Part number
91565A565

Low-Strength Steel Threaded Rod
1/4″-20 Thread Size, 4″ Long
Part number
91565A558

Low-Strength Steel Threaded Rod
1/4″-20 Thread Size, 2 Feet Long
Part number
98790A029

Nonmarring Swivel Tip for Screws and Threaded Studs
5/8″ Diameter
Part number
84875A41

Zinc-Plated Steel Knurled Inserts for Hardwood
1/4″-20 Thread Size, 0.473″ Installed Length
Part number
94738A310

Black Phenolic Plastic Knob
Knurled Grip, 1/4″-20 Threaded Hole, 1-3/4″ Diameter Head
Part number
6479K18

1-1/2″ Long Corner Bracket for 1-1/2″ Rail High Aluminum Bolt-Together Framing
Part number
8809T62

Low-Strength Zinc-Plated Steel Hex Head Screw
5/16″-18 Thread Size, 4-1/2″ Long
Part number
91236A601

mcmaster.com

McMaster-Carr

McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.