The Hub

Hello! First time poster, long time lurker... I thought you guys might get a kick out of this. I got fed up of having to re-mount my workbench lid after pulling it off a particularly bumpy/cold/hot/anything truck ride and began searching for a mounting system that would hold everything up when the lid was open, but also crucially not fall off when it was closed after the show. I happened upon multiboard, which looked like it could do the…

Dear looth community/colleagues around the world, During 2023/24 I have developed a digital gauge to measure so-called longitudinal twist of (bass) guitar necks: the LTwist® gauge. Just to be clear, this is about the "cork screw" type of deviation along the length of a neck, not the bow of a neck. I think there is no need to explain how a too severe neck twist can make it difficult or even impossible to set up a stringed instrument (guita…

Hi Thought I'd say "hi". I've just joined the group. I'm Rob, I'm based in Yorkshire in North England. I'm mainly interested in elictric guitar and electric bass building and playing. I've built around 5-6 guitars/basses through 3d printing. I've two Prusa MK4's and been printing for around five years. The design and build of them is logged here https://www.basschat.co.uk/topic/485214-a-3d-printed-six-string/ And https://www.basschat.co.uk/t…

Just wanted to say I bought a chisel through Hyperkitten Tool Company and it went great. It's very old school, ordering and shipping are not a fast process, but if Josh has a tool that piques your interest I highly recommend it. I picked up this long boi paring chisel from the mid to late 1800s and I'm quite happy. https://hyperkitten.com/

I usually build flat top guitars and usually joint the tops and backs with a Stanley no 5 style of hand plane ( only different brand). I want to build an archtop instrument, and the wood blanks I have are longer than usual and, of course, a lot thicker. What size plane do you use for kind of job? Would it be easier with a longer plane (6 or 7)? Thanks! Jorge

Here is a super basic thing I just modeled and 3d printed. Small drill guides to place a 2mm hole directly centered in the side of a fretboard. I made a few sizes for different fretboard thicknesses. Seems simple but its a huge time saver.

I've seen the Elevate Luthierie jig, and it seems simple enough. One thing I don't like about their explanation video is the handwaving around "set the joint length where you want it"...feels like even with the jig, you have to do too much measuring to make it fit exactly (or within the tolerance you want) Given I can model well enough in Fusion and have a 3D printer, feels like a challenge to take on! As far as I can see, the jig is just…

https://www.youtube.com/playlist?list=PLrZ2zKOtC_-DR2ZkMaK3YthYLErPxCnT-

This is a repost from the main feed so it is in the correct forum. The recent F5 CAD modeling video inspired me to take a stab at it. I use Fusion 360 and have already completed a full A5 model that I’m using to prepare a lot of parts for my CNC. The F5 top seems intimidating. I focused on modeling the scroll alone for now. I didn’t pay attention to following a plan, or having perfect dimensions, or getting the curves to look perfect th…

Is there a Pneumatic Fret Tang Nipper out there or did anybody ever combined a Tang Nipper with a pneumatic Plier? Or maybe it is possible to take the Stewmac Tang Nipper (i like the new version) and modify it? I always make 20-40 Sets of frets ready so i can make a lot of fretboards ready in one day. But after a while my hand really hurts. Thank you