The Hub

Hey all. StewMac is looking for an experienced luthier (build and repair) to help us refine a series of articles for our website designed to enhance our SEO optimization (part time / contract). This work is remote and you will coordinate with our marketing team and SEO agency. The main objective will be editing and making suggestions to our team to ensure the quality of the information is accurate and reflects best practices within the cr…

A visual dependency map for Autodesk Fusion. It turns complex Fusion designs into an interactive map of model logic, helping users understand how parameters, sketches, construction references, features, bodies, and other design elements relate to each other. Instead of digging through dense timelines, browser trees, and feature chains, Node Atlas gives users a readable graph of how a design is connected. It is built for designers, builder…

Modified Feed Spool to have two sandpaper slots: one for 400 grit or lower and one for 600 grit or higher. Modified Take Up Spool slots to hold 600 grit and higher papers without slipping. Updated files are available in .zip download. https://dev2.loothgroup.com/loothprint/fretsander/ Images

Doug Proper designed a sanding jig that supports variable concave and convex curves, described in the following Loothgroup article: https://loothgroup.com/post-imgcap/the-variable-radius-sander/ I built one and am impressed with how it facilitates preparing bridges, braces and also allows tracing any radius using the chord formula. I made a rough measured drawing and assembly guide to share, with Doug's blessing. First step, ma…

Back at tinkering with the new Isoparametric Curve tool in Fusion. Scroll down to PICTURES LETS GO! If you want to skip this little walk through Autodesk Fusion memory lane, clearing up some of the UI conFusion. Why something so seemingly basic, is just being added today. 2009- Autodesk Inventor, hybrid modelling experiment, parametric and direct CAD in one hybrid system. 2011- Autodesk acquires T Splines Inc. an organic modeller still in…

Found this, will print later, saves a little design time. https://makerworld.com/models/1835300?appSharePlatform=copy Having made 3D printed Vacuum fixtures for CNC previously, I’d recommend printing as close to 100% theoretical density as possible, as any voids can and likely will lead to suction loss. Finer dimensional stability and layer adhesion with something with Glass Fibres will probably help. I’d avoid materials with additives th…

Hi guys, here’s something I’ve been working on: a fully automated, programmable pickup winder. The software is still in alpha testing and there’s still a lot to design, but this is what it looks like so far! Images