The Hub

I've built some acoustic guitars and I want to get into some electric builds. On that note, I have a highly regarded player around here asking if I could wire an existing solid body to his liking. He is providing two 500K pots, two P90 pickups and a 3 position switch. He wants two volume controls, no tone control. He's quite an accomplished player and I don't know enough to question him. I got a Seymour Duncan diagram from their si…

Hey all. I've got the above-mentioned guitar on my bench. It had a neck reset and what appears to be a new bridge pad put in 14 years ago. It's a crack-free guitar except for a couple of little hairlines running from the back of the bridge to the upper tone bar. I thought that was a bit weird. Inside, everything looks okay until I turn off the inspection light, at which point I can see the rosy glow of daylight through the top - this…

Hello everybody, I am about to embark on building an acoustic with a top other than spruce. I have some mahogany and looking to buy some koa. I have always heard and read that when looking for spruce tops that the tighter and straighter the grain on the top the better. Should this hold true for other species as well. For example, looking at the sample koa selection in the picture would the center option have a better sound than the optio…

Someone came to me with an old Gretsch afflicted with binding rot. The cream binding was mostly intact, with some pitting and discoloration in various spots, and only a couple of pieces loose. The owner was aware that the only sure cure was the removal of the old binding, and then rebinding the guitar. They didn't want to invest that much money into a repair. I rediscovered a StewMac video from 2017 called "Guitar repair using kitchen…

Anyone got any good tips for regluing a brace in an acoustasonic strat? I can get in there with a magnet and little violin clamp, but can't get effective pressure all the way down with those. Does someone make small scissor jacks? The gap between the top and back is 1.25 inches, so I can't fit even our cut-down normal one. I'd like something a little more elegant than wedging short sticks between the brace and back, but will use th…

Hallo, I have an old archtop (plywood) that needed a refret. There is no trussrod. I talked to the owner, he knows that my work will maybe/eventually more expensive than the value of the guitar. But it was only after leveling the fretboard that I realized that the fret slots are completely off. I talked to the customer again, and we agreed, that I should put a new fretboard on the guitar. I have one, that I took of an old guitar, and reuse…