The Hub

This guitar does not have a dovetail. It has five dowel. Three in line and two at the top on either side of the truss rod. Remove truss rod nut before sliding neck straight out.

Guitar fell straight down on the headstock when it was hanging up at the refinishers. Shit really does happen! Grain is pretty much shattered around the adjustment nut. Thinking I’ll replace the entire broken area with a completely new piece of mahogany. Scarf it in between the volute and 3rd fret. Probably even a 3 piece lamination to mimic the neck. This one was not the clients fault so the expectations for looking close to original a…

Any tips on handling the off-gassing for vintage guitars? I just took in a 1941 D'Angelico. The original tortoise shell pickguard is gone and has been replaced. New case as well. The frets up the neck are going to need to be cleaned. But are there any other precautions I should tell the client to take? Anything I should take into account? -Mike

I've got a client with a '72 Tele. It needs a re-fret, but the truss rod isn't functioning. In fact it's backed out of the channel significantly, and there's a bulge in the neck underneath the first fret which suggests to me there's something going on with the truss rod anchor. The puzzling thing is the wood in the neck has bulged, but the skunk stripe and the finish don't appear to be disturbed at all. I'm thinking I'll probably hav…

Hello, I just received an unfinished, slotted but not fretted maple neck from Warmoth. I believe standard practice is to fret then finish but I’m curious if it might be better finish before fretting? I understand one would want to prevent finish from entering the slots. I’m and going to use tru oil and do a light finish, maybe three or four light coats. Thoughts for this beginner? Dave

I've built a number of classical guitars with an adjustable neck and they seem to gather quite a bit of interest, so i'm currently in the process of looking to refine the design and build. It's quite a simple construction where the neck is held together by string tension and hangs on a pivot. I developed a 3d printed "socket" which acts as the interface between the body and the guitar and allows for some fine tuning of the alignment of t…

I've owned this Jersey City made 12-string/drone 'harp' guitar for a few years and want to get on the repair. I've taken the necks off many dozens of Schmidt-made guitars but never one with two necks. I've searched the web looking for harp guitar neck removal and didn't find anything of use. Asking for any tips/aids/experience from the loothers. My plan is to make a custom neck removal jig that fits the necks, and then drill the typical…

Hello all! My name is Jake and I run a repair shop out of my NYC apartment. I am looking for someone who's experienced in CAD to help me with a project. I am working on a 5 string headless bass build for a customer. The neck & body are to be CNCed by a local mill here in Brooklyn, NY. I have a 2D design (PDF and CRD), but I need help making some modifications, as well as translating it to 3D. Pay is negotiable. I will basically pay whate…

Long story short, customer want to add carbon fiber in the neck for strength. Without string tension, the neck is dead straight; with strings, it's about double the relief he'd like. Is it insane to add carbon to this guitar? Or is it fine?

Hi friends, I just stumbled upon a 1966 P-Bass, nearly completely original. The owner bought it in 1971 and it had already been stripped of its original finish. That was a thing back then. You can guess that 55 years of gigging had the wood absorb much of the owner’s DNA and sweat. Maybe a few beers as well. Surface was quite tacky as you can expect. I cleaned it with naphta and StewMac’c brand-new cleaner (quite a great product I'd say…

Friend brought his "old guitar in the basement" over for me to have a look at. Long story short, it's a 1945 D-18, it's all original and it's a beauty. He had no idea. I explained to him that it was worth somewhere between 15 and 25 thousand bucks, that it needed some fairly routine repairs and that he should get - among other things - an insurance rider and take a little more care of the guitar than he has been. Picture attached for fu…

Hello, I hope everyone is having a great 4th of July weekend so far. I was recently asked by a friend to work on a cheap S101 bass someone had given to him. It had no electronics and it was severally back bowed. After finishing up the electronics, I did the set up. He wanted the guitar tuned low, to Drop C. So, I went out and bought some Ernie Ball Power Slinkies 55-110. Once I got to the nut depth check, it was clear there were large, g…

Howdy folks, I'm a 2026 graduate of the two year guitar program at Red Wing (Minnesota State College Southeast). Between my two years at Red Wing I worked at Collings Guitars in Austin, TX for two years in the acoustic neck department, shaping and finish sanding ~2000 necks, radiusing and gluing ~750 fingerboards, and pressing ~100 sets of frets. I also spent a couple months in the finishing department level sanding and pore filling ~300…

I am building an archtop mandocello (A style) and I'm trying to find out how to make the neck block. It would be more or less like an A style mandolin neck block, but obviously quite a lot bigger. More or less like the image attached. The blank should be aprox 10 x 8 x 12 cm. I'm trying to find a piece of hardwood big enough for this, would it be acceptable if I made some kind of laminated piece? And how should the grain direction be idea…