The Hub

It's not a big chip so Iwas thinking of trying the black glueboost fill n' finish. Is that the best option? Any tips/suggestions appreciated. Thx! David

Hey everyone, I had a question on how to approach this bridge reglue. It's from a 1940's Kay type guitar, I removed the bridge without issue, and did some surfacing of the underside of it, but there's a problem. The bridge is missing material on the outer edges and I don't think I can remove much more material without compromising the overall shape and structure of it. I was wondering if you had suggestions on how to approach this? I wa…

Client wants me to add a Tone control similar to this (pic) to his archtop. where can I get one? Thx!

Hi guys, it's my first post here. First of all, english is not my first language, so I'm sorry for any mistake or its a bit rough. Recently I have a Sterling Maj200xsm from a costumer that has tunning issues with the tremolo. Any of you has experience with this model? I made a full set up and I checked the nut, saddles, springs, and dont found the trouble. Sometimes there are no issues at all, then the 2º and 3º string goes higher, then…

in for some top cracks and playability issues, neck is underset by almost 1/8" with significant hump at the joint...just got the strings off and got a better peek under the circus tent and... how the what the why? i just... really I... ummmm....can anyone guess what is going on here? Tempted to hand it back over any half-measure foolery. Third Japanese built one in this year but I've not seen this sort of hijinx...

I heard some of you were complaining about the tedium of connecting with people to message etc. Due to privacy concerns and the potential for marketing to be abused, I cant auto connect everyone, but I have a compromise. In your profile there is a button that say connect me automatically. When you toggle this it will automatically connect you to anyone who requests your connection. You can also still mute, block and un-connect, if someo…

Hi all, I'd like to get some input on how to address this top blowout. For starters I own this, I got it as a project guitar, 71 D28. I'm not as experienced with acoustics as electrics and this is a big project but I got it to learn new skills and I'm confident I can do it with guidance. It had been stored in the case for many years under tension and was way too humidified. The bridge had pulled up I assume in stages. The center seam se…

Hey all, I've received a call from a woman who's husband ( and former student of Somogyi ) has recently passed, and she's looking to find anyone interested in purchasing his tonewood hoard. It appears he had intentions of building a fair amount more than he had time for here, and she's been calling around to folks hoping for some interest to no avail, so I told her I'd post here for her...She has had another local luthier compile a fair…

I've seen mention that mandolins can be held in the PWS, but haven't seen any good examples of how to go about it here or in the Total Vice materials. Having just started using one, I'm having a hard time coming up with an acceptable solution on my own. Any experienced advice will be appreciated!

Hi All, I wanted to check in with folks in the industry and ask for some advice. I have been on a building Hiatus for a number of years now (Hand Injury, Medical Issues). Things have gotten much better, and I am fully able and capable of building once again. The 2nd biggest hurdle I have had was a lack of opportunity for shop spaces to build. I now have a viable workspace and full use of my hands once again to build. The problem is that, o…

I’ve got a client requesting a weight reduction on his Kurt Cobain Jaguar My approach would be in 3 steps see how much I can route down the existing cavities (might not be a lot of weight loss) route under the pickguard without compromising the instruments integrity if additional weight loss is required, drill into the body with airline drill bits to gain a few more grams current total weight all including 4.2kg Any advice is welcomed 🙏🙏🙏

I was approached by a local music venue about finishing over the signatures on this Dean guitar. I have finished over signatures before, but never an entire guitar. The main challenges, as I see it, with this endeavor is prepping the existing finish. Cleaning the existing finish without disturbing the signatures will be time consuming enough, but abraiding/sanding the finish will be cost prohibitive. I have already experimented on a test…

What’s the best way to make stark white ABS binding resemble 60 year old celluloid?

Looking to get a custom fingerboard slotted, radiused and cut for block inlays, preferably in Canada. Any leads much appreciated! 🙏