The Hub

Any tips on handling the off-gassing for vintage guitars? I just took in a 1941 D'Angelico. The original tortoise shell pickguard is gone and has been replaced. New case as well. The frets up the neck are going to need to be cleaned. But are there any other precautions I should tell the client to take? Anything I should take into account? -Mike

Anyone have plans/drawings for a vintage spec AJ they can share, or a link where I can buy them? I haven't been able to find anything other than J45 plans with general notes on the differences that aren't clear enough to follow. Thanks!

Since most of us fix or make guitars, we have probably heard something about the cease and desist letters Fender has sent out concerning the Stratocaster. I thought I would offer some thoughts. As always, caveat emptor. There are three basic ways to protect intellectual property under Federal law. Patent, trademark, and copyright. Each protects different things, and has different underlying legal theories. Lets begin with pate…

Hello again folks, how is everyone! So I'm curious about what people here think about re-tops, who's done them, and what sorta ballpark rates you've charged for past completed jobs. I've got a bit of a wild one here, so strap in if you've got a couple minutes for story time! Back in 2012, I traded an HD28V of mine for a cool 1966 D-35 that needed some work. Basically, the body and neck of the guitar were fine apart from…

Hi there! Working on a Squire Vintage Modified Jag. relevelled and crowned the frets. Lovely job. Set the relief and action to factory spec. So far so good. With a capo on the first fret, I set the string radius at the saddles to 9.5" using an under-string radius gauge, everything lined up nicely... ...but when I measured the action of all the strings along the 14th fret using my digital nut slotting gauge (expecting a unifo…

Reputable looths in Albuquerque, NM? A buddy of mine needs work on his mid-60's Jaguar. I know it's missing a saddle and needs a general going-over and a setup, nothing major. But it's a vintage instrument and it's his baby, wants to make sure it's in good hands. Who do we know out there?

I had a vintage Gretsch semi hollow come through the shop this week and it's left me with some questions. First off identifying the instrument's model has been a trick so far. The only information I can find is that is was likely built in and around the early 50's Second, it's in need of a neck reset. I'm not particularly well versed in resets for hollow and semi hollow guitars, especially one of this age and design. I'm very curious…

Hi all, I'm new here. I've been playing guitars for ~15 years and recently started as a technician at a music production school in London, where part of my job is maintaining the guitars. I picked up this 50s parlor nylon the other day and it's in bad shape but I don't know how to go about repairing it. The main issue is the bridge. The guitar was kept high strung and the bridge has twisted and lifted off slightly at the base. T…

I'm fast approaching the finish coating of 2 acousitcs. The sitka spruce tops are really bright. I'd like to tone them down a little and have been scouring the web for methods. Seems like adding amber toner in either the sand sealer or more likely the first set of nitro lacquer coats might be the the ticket. I see Stewmac has a Colortone stain called "Vintage Amber" that can be mixed into the nitro. Anybody have expirience with this pro…

I've got two hofner senators with pickguard mounted electronics. It's got a very specific output jack that's outdated from what I can find, cant find a vintage cable for it and reluctant to modify the body of the guitars to put a regular placed output in there. Does anyone have any experience modifying these pickguards? I'd like to keep it as true to the original but interested to see what people have come up with in the past If anyone ha…