The Hub

This is a no name classical with fan bracing. The owner , an orthopedic surgeon , had a friend buy this for him years ago in europe. His daughter had it for a few years and the cracks showed up. I had repaired some of the other top cracks with TJ Thompsons cauls and cleats. These two cracks I wonder about. Both are cupped upwards slightly. I have pictures of the cracks and pictures with a clear overlay showing the bracing below. I really…

Here is a simple tool that has helped me many times. Mic goose neck with a cut drum stick on end to push out side damage repairs. It also has a couple of magnets on the other end to position cleats or connect with outer magnets.

Hello estimable friends, A very long-term friend of mine left us on Christmas Eve after a long illness. His sister tasked me with evaluating, restoring, and selling his stuff. Today I'm preparing to restore a 2008 Longhorn GOM to its original EMGs. Pulling out the humbuckers I see a Pearly Gates and… what looks like an original short-magnet PAF. Correct shape brass screws for the bobbins, UV light confirms sticker and tape, tooling mark…

Santa heard I had a challenging year so he got me a 3d printer for Christmas. I’ve been printing like crazy, learning the machine. This has resulted in a bunch of tools that either don’t work for me, were attempts at mixing colors, or have very minor printing blemishes. Two lots up for grabs to anyone in the US who wants either. I’ll mail to you for free. First one to claim each gets it :) First lot has parametric nut and saddle sanders…

I recently had a guitar come in with a crack in the top. The top was an arch top so the top was thick and the crack uneven from side to side so I wanted to be able to supply more pressure then just using magnets to be able to even up the crack sides. But access was limited to a small sound hole and so no way to get jacks or a clamp to fit. I also wanted to use full length longer cleats instead of fiddling with the tedious fishing reel…

Like many of us, I work in a small space - a quarter basement with maybe 6 -1/2 feet of headroom. Sawdust is a problem. There’s no room for an extensive ductwork system or a blower setup. My shop tools (bandsaw, drill press, vertical belt sander, etc.) have a 1-1/2 inch connection for vacuum, but I have mostly been too lazy to use them. (note that I finally added a portable shop air cleaner with HEPA filters). When the most recent Wo…

Hi everyone. I've built a bunch of pickups, in a variety of configurations, but I haven't built a set of blade humbuckers yet. I usually make my own bobbins/flatwork, but since this is my first set of blades, I went ahead and purchased some bobbins to see what they're all about. Which leads me to my question: how does the bobbin retain the blade? With the parts I have, the blade just slides into the top of the bobbin. Not especially snu…

This is a simple riser to fit between tuning machines on a headstock. I made two versions. One with a magnetic base and one that just clips on to the workstation.

I just opened a repair shop and the first repair was to remove a broken 1/8" hex wrench ball end from the truss rod nut of a Turner RB4 Renaissance Bass. I read of all sorts of theories on how to extract/remove. None of them had recorded actual attempts of the theories. There's probably others on here but I haven't found them. The ball end was loose and mangled at the rear of the nut sleeve. I tried fairly benign methods first. Heat…