Tune-O-Matic Bridge Installation Angle Template (3°)
This template is designed to help you install a Tune-O-Matic bridge at a 3° angle. Simply mark your guitar’s centerline and intonation line, line up…
Loothprint Type: Instrument Construction Tool
Elevate Lutherie Mortise and Tenon Jig center finders
The Elevate variable mortise and tenon jig is great, but it can be a bit fiddly to line up with the body when cutting the…
Parametric Nut slot jig
I decided it would be worth the effort to come up with a more customizable version of the mandolin nut slot jig I submitted a…
AUK tools router top-to-side air vent conversion
Similarly to the Jessem router design, the idea is to have the router venting air stream not interfere with the dust collection going in the…
Spool clamps with integrated nut (no glue needed)
You need to insert a pause in both prints to insert a 1/4-20 nut which then gets printed over. Cost Breakdown per 1 clamp $0.65…
Parametric Pickup Routing Template
About the LoothPrint This template is designed for routing pickup cavities and is fully parametric in Fusion 360, allowing you to adjust the dimensions to…
Fret crowning file safety bumper and finger support
If you like to crown with the index finger extended and resting on top of the file and youre seeing a painful permanent divot/ groove develop.. this m…
Toggle switch nut key
Outer diameter adjusted to fit in recessed installations, like the ESP custom shop. Square 6.35mm / 1/4" screwdriver adapter, wings for toolless use.
…
Fret End Bevel Jig
I use this jig when I want to bevel frets prior to installation. It has a 10-32 x 3/4" Button Head Cap Screw to adjust the bevel and from 27-33 degre