Responses

1. 

   John Wallace. John Wallace Guitars. January 3, 2025

   A humble collection of widgets and trays of different sizes to install on your Gridfinity neck rest.

   The trays all have a cove/scoops in one corner to make removing small pieces easier.

   I made several sized pencil cups to hold misc tools. The smaller one is perfect for cotton swabs and disposable micro applicators. Options for full, half or quarter divided.

   #9 Holds nut files or crowning files and possibly others.

   #12 has an open end because some files/tools are larger than can be contained within the 9×9 Boxes. Face the open end toward yourself for easy access.

   #21 Fret holder has two version. One with a single set of holes and one with two rows. I personally place removed frets on the rear row and frets to be installed in the front.

   #14 and#20 are sized to hold fret rockers and action gauges.

   I included a 4×6 sized tray that wont fit into the neck rest grid, but they’re handy to have on the bench in general. They’re a perfect size to hold bridges, pots and anything else that comes off an instrument. They’re stackable and an easy way to keep clients guitars parts separate from one another.

   The zip file has 25 .stl files as well as a master .3mf file on 4 plates for Bambu printers with a 256mm beds.

   Thanks for looking and hopefully you found some of these files useful. 🙂

   ~ JW