-
Buck's Fret Wire CalculatorFretwire Finder — Full Dataset Fretwire Finder Tang-first matching • Brand & Material filters • Sliders + manual input • Sellers inch mm + Add…
-
Back to Basics: The Soundboard Monopole 101, with Giuliano NicolettiGiuliano continues his series on acoustic guitar theory with a focus on the soundboard monopole. Giuliano Nicoletti (Iulius Guitars): https://www.iuliusguitars.com/…
-
Have you got a FANTASTIC broken guitar story?
– The angry ex that smashed a guitar
– The guitar that survived a cross-ocean expedition
– The guitar that was stolen and recovered
I’d love to put an entertaining show together with maybe 4-6 fun stories. Extra points awarded for photos/videos/demonstrations. Please reach out to me if you’ve got a…
Jon W Queno Musical Instruments, Gerry Hayes Haze Guitars and Beau Hannam - Beau Hannam Guitars0 Comments -
Yo.
Trevor Collings Guitar Garage NZ Ltd, Chip Tait Brooklyn Fretworks and Karl Borum - Borum Acoustics0 Comments -
-
In search of an Epiphone FT-130 (similar to FT-140 and FT-150) bridge with adjustable saddle for a client. Current market is seemingly tapped out, and replacements found online are simply too wide and bulky looking replicas fabricated overseas. Any ideas would be greatly appreciated. Thank you.
View more comments-
I have one laying around somewhere……..
- View 1 reply
-
This bridge is off a 1970 FT 145. It has superficial cracks around the top of the pin holes that do not go all the way through the bridge and can easily be filled.
- View 1 reply
- View more comments
-
-
Truss Rod Length - Is there a "rule of thumb"?
Friends – My “go-to” truss rod for my basses has been the rod sold by LMII; however, since they are now out of business, I am evaluating what other rods are suitable for bass guitar necks. The attached photos are all showing truss rod lengths from the front edge of the nut slot location on the blank. One photo shows my last LMII rod (23 1/2″…
James Roadman, Jedd Kettler and Jon W Queno Musical Instruments -
Seeking Mid 70's Martin D28 High Action Assesment Input And Recommendations
I inherited a 70’s D28 that is a players instrument. The action is too high for me, but the saddle is bottomed out. There is no obvious belly bulge. The top of the bridge has been shaved. Bridge pin holes are uneven in diameter. However, the bridge placement seems pretty close; within 1/32″. A straight edge on the fret board sits about 1/8″…
Ian Davlin The Looth Group -
Just finished my 7th acoustic guitar and have an issue that is perplexing me. Before putting strings on the guitar the bolt on neck fit very well. However after stringing up there is a tiny gap at the heel (please see pic). If I take off the strings (removing string tension) to floss the joint the gap isn’t there. Does anyone have tips to remedy the issue?
Jedd Kettler -
3D Club: Machining bridge pins on a CNC routerJames presents his method for machining bridge pins on a CNC. James Roadman (Roadman Guitars): https://jroadman.notion.site/fdb571310a7a4f0fa2e9da8f9c7ae818 https://www.instagram.com/jroadman/ 0:00:00…
- Load More
