-
Yamaha FG350W hight adjustable bridge
I have a Yamaha FG350W that has one broken screw for the adjustable bridge. Is there anyone out there that might have one lying around, or can maybe machinge one or two? 🙂 The screw is a little bit special so I did my best Leonardo DaVinci drawing of it! 🙂
I know it is a long shot but you never know! 🙂
<br clear=”all”>(not my picture. For reference)
-
4 Replies
-
Here is a “correct” drawing of the adjusting screws general form. 🙂
-
I have alerted @James Roadman to see if he has any ideas about this one. It seems to me I had an idea about this a long time ago. Maybe it will come to me after coffee.
-
Hi Peter,
I could machine a couple for you. Let me check with some of the stores I work for to see if they have one in stock to copy the screws. If not I would need a measured drawing.
-
Hi! Sorry for not replying earlier! Have not got a hold on the hardware peace until now! 🙁
So here you have av “better” drawing of it, with measurements. Please let me know if there is more that is needed! 🙂
/Peter
-
-
Log in to reply.