The Hub

Finally! I have come up with a way to keep these music nomad nut files organized in a functional way! This can be hung up on pegboard when not in use or the removable base can be added to make it free standing on whatever bench I’m on.

Hey guys, I’d love to get some suggestions on how to finish this repair aesthetically. The customer brought it in because this piece had split while trying to remove the saddle using a rubber mallet. My main concern is that the joint between the two pieces of wood is still visible. I was thinking of doing what I’ve always done: using wood dust mixed with CA glue or Titebond. But I was wondering if you guys use a different method that migh…

I need some suggestions from the many great repair senseis out there.The customer is fine with a structural repair and not concerned about making it invisible. I told him you will see anything I do. He was fine with that and has a budget of between $700-1000. It's a clean break. nothing missing, It closes tightly.. I was thinking either 1) the generic double splines one on either side of truss rod and touchup as best I can. Or 2) the ab…

Hi guys, it's my first post here. First of all, english is not my first language, so I'm sorry for any mistake or its a bit rough. Recently I have a Sterling Maj200xsm from a costumer that has tunning issues with the tremolo. Any of you has experience with this model? I made a full set up and I checked the nut, saddles, springs, and dont found the trouble. Sometimes there are no issues at all, then the 2º and 3º string goes higher, then…

Hey all, I have been working with the work station for a few months now. I love it. I found a few little things that have helped me. 1. A mic stand to support the main beam. I bought the Total Vise version and it didn't work as well. 2. Rockler Bench Cookies as rear cross member supports. They have the correct 5/16-18 inserts in them and screw on easily. Now the thread rod has a sort of hi/low setting by just flipping it for acoustic or…

This guitar does not have a dovetail. It has five dowel. Three in line and two at the top on either side of the truss rod. Remove truss rod nut before sliding neck straight out.

Guitar fell straight down on the headstock when it was hanging up at the refinishers. Shit really does happen! Grain is pretty much shattered around the adjustment nut. Thinking I’ll replace the entire broken area with a completely new piece of mahogany. Scarf it in between the volute and 3rd fret. Probably even a 3 piece lamination to mimic the neck. This one was not the clients fault so the expectations for looking close to original a…

Hello Luthiers and Guitar Builders,We manufacture and supply high-quality natural bone Guitar Nuts and Saddles in custom sizes for acoustic, electric, classical, and bass guitars.What We Offer:• Custom-sized Bone Nuts & Saddles• OEM & Bulk Orders• Precision Cutting & Finishing• High-Density Natural Bone Material• Consistent Quality• Worldwide ShippingWhether you need a single custom specification or bulk production for your workshop or…

Hello All I have been using Ted Bergstrand's online nut calculator on Benchmuse.com which is excellent. It allows you to have a consistent gap between each strings vs the progressive gap that the Stewmac rule gives you. Or you can do consistent centers to the strings. I have definitely found measuring the nut with calipers to work a lot better than the stewmac rule and don't use the rule anymore. I wanted some additional functionality…

Hey guys. I guess this is an old topic, everyone talks about it but I haven't been able to find a definitive solution for this. Here's the deal: I'm working on a PRS Silversky that has this old problem that when you use the trem bar, one string (G in this case) goes sharp. I made a few adjustments to the nut as we all know that's the first thing to look at...no good. This guitar is new so I'm pretty much ruling out the bridge and posts si…

Hello, I hope everyone is having a great 4th of July weekend so far. I was recently asked by a friend to work on a cheap S101 bass someone had given to him. It had no electronics and it was severally back bowed. After finishing up the electronics, I did the set up. He wanted the guitar tuned low, to Drop C. So, I went out and bought some Ernie Ball Power Slinkies 55-110. Once I got to the nut depth check, it was clear there were large, g…